Delta | 10-Tier Vertical Dumbbell Storage Wall/Rack Mount
Wall or Rack Mount
Wall studs, 3x3 or 2x3 uprights · 1" or 5/8" holes
10 Pairs · 5-50 lb
Designed for a traditional Hex set
Floor-Resting Mount
Weight loads through the floor, not the mount
12 Color Options
Match your gym or stand out
Stores a full 10-pair Hex set (5 to 50 lb) on a slim vertical footprint that bolts to a wall, 3x3 upright, or 2x3 upright. Pick wall, 1" hole, or 5/8" hole mounting at checkout. The rack rests on the floor while mounted, so weight loads through the floor, not the mount. Wall and rack stay light-loaded, install stays rock-solid.
Color:Black
Mounting Hardware:Wall Mount
Add Dumbbells
Wall or Rack Mount Flexibility
Mounts to wall studs, 3x3 uprights, or 2x3 uprights. Pick your mounting hardware variant at checkout: Wall Mount (brackets + 1/2" screws), 1" Hole Rack Mount (adapters for 1" holes), or 5/8" Hole Rack Mount (adapters for 5/8" holes).
Holds a Full 5-50 lb Hex Set
Sized for a 10-pair traditional Hex dumbbell set in 5 lb increments (5, 10, 15, 20, 25, 30, 35, 40, 45, 50 lb). Alternative configurations work for sets like 10-55 or 15-60 lb.
Floor-Resting Design
Engineered to rest on the floor while mounted to the wall or upright. The floor bears the weight load while the mount provides stability against tipping. Safer install, lighter load on your mounting surface.
No Finger Pinch
Designed with 4.32 inches of inside handle space, generous enough to grab and re-rack Hex dumbbells without pinching your fingers between handle and rack. Fits dumbbell handle dimensions of 5 inches or more.
Built to Last
Built from 14-gauge steel with a chip-resistant powder coat finish. Reinforced brackets and heavy-duty hardware throughout. Backed by our Limited Lifetime Warranty.
12 Color Options
Available in 12 powder coat colors: Black, Synergy Blue, White, Red, Grey, Orange, Yellow, Blue, Military Green, Military Tan, Hot Pink, and Purple. Match your rack or stand out.
| Model Number | DB-VERMNT10 |
| Dimensions | 70 5/16"H × 4 5/8"W × 5"D |
| Inside Handle Space | 4.32" |
| Required Dumbbell Handle | 5" or more |
| Material | 14 Gauge Steel |
| Finish Type | Powder Coat |
| Warranty | Limited Lifetime |
Compatible With
| Mounting Surfaces | Wall studs, concrete, 3x3 uprights, 2x3 uprights |
| Hole Compatibility | 1" holes OR 5/8" holes (pick variant at checkout) |
| Dumbbells | 5-50 lb traditional Hex set, 10 pairs · also fits 10-55 and 15-60 lb arrangements |
| Dumbbell Handle | 5" or larger handle space |
| What's in the Box | 1 rack + mounting hardware kit for the variant you selected |
Frequently Asked Questions
No. This listing is for the Delta 10-Tier Wall/Rack Mount only. Dumbbells and the wall/rack shown in product photos are not included. The mount does come with all the mounting hardware you need for your selected variant (Wall Mount, 1" Holes Rack Mount, or 5/8" Holes Rack Mount).
Three options at checkout, all priced the same. Pick the one that matches what you're mounting to:
Wall Mount: For mounting directly to wall studs or concrete. You'll receive brackets and 1/2" screws.
1" Holes Rack Mount: For mounting to a 3x3 or 2x3 upright that has 1" mounting holes. You'll receive the adapters needed to mount through 1" holes.
5/8" Holes Rack Mount: For mounting to a 3x3 or 2x3 upright that has 5/8" mounting holes. You'll receive the adapters needed to mount through 5/8" holes.
Not sure which hole size your rack has? Measure the mounting hole diameter, or check your rack manufacturer's spec sheet. Synergy racks use 1" holes. Some Rogue, REP, and Sorinex models use 5/8" instead.
Wall Mount: For mounting directly to wall studs or concrete. You'll receive brackets and 1/2" screws.
1" Holes Rack Mount: For mounting to a 3x3 or 2x3 upright that has 1" mounting holes. You'll receive the adapters needed to mount through 1" holes.
5/8" Holes Rack Mount: For mounting to a 3x3 or 2x3 upright that has 5/8" mounting holes. You'll receive the adapters needed to mount through 5/8" holes.
Not sure which hole size your rack has? Measure the mounting hole diameter, or check your rack manufacturer's spec sheet. Synergy racks use 1" holes. Some Rogue, REP, and Sorinex models use 5/8" instead.
Yes. This rack was designed specifically for a traditional 10-pair Hex set in 5 lb increments: 5, 10, 15, 20, 25, 30, 35, 40, 45, and 50 lb. That's the most optimal spacing and balance.
Yes, with a shifted set arrangement. The 10 tiers also fit other 10-pair combinations like 10-55 lb (10, 15, 20, 25, 30, 35, 40, 45, 50, 55) or 15-60 lb (15, 20, 25, 30, 35, 40, 45, 50, 55, 60). If you have an unusual set, contact us first to confirm fit.
No. The inside handle space is 4.32", which is generous enough to fit your hand under a dumbbell handle (typically 5" or more) without pinching. We designed extra clearance into this rack specifically to avoid the pinch issue you'll find on cheaper racks.
Yes. The rack is engineered to bear its load through the floor, not through the wall or rack mount. The mount itself acts as a stability anchor that keeps the rack from tipping forward. That makes the install safer (no risk of overloading a wall mount) and lighter on your mounting surface.
The rack is optimized for traditional Hex dumbbells, where the hex shape sits stable on the tier arms. Round dumbbells (urethane, rubber-coated) often fit but can be a snug fit at the larger end. Pro-style or non-standard shapes may not fit reliably. Check the dimensions or contact us before ordering if your set is non-standard.
Limited Lifetime warranty on the steel and powder coat finish. The 14-gauge steel and reinforced brackets are built to outlast the dumbbells they hold. We also offer a 30-day return window from delivery if you change your mind.