PRx 20kg Cerakote Olympic Barbell
20 kg / 45 lb
86 inch bar, 28.5mm shaft
Cerakote Finish
Scratch and rust resistant
190k PSI Steel
Dual bronze bushings
Made in the USA
Lifetime warranty
The men's spec Cerakote barbell: 20 kilograms, 86 inches, with a 28.5mm shaft at 190k PSI tensile strength. The oven cured ceramic finish is highly scratch resistant and 70 percent more corrosion resistant than zinc, dual bronze bushings keep the sleeves spinning smoothly, and PRx backs it for life.
Made in the USA
PRx manufactures the 20kg Cerakote Olympic Barbell in the USA. Synergy is a PRx retail partner, and your bar ships to you directly from PRx.
What Cerakote Is
A thin ceramic coating sprayed on and oven cured after the bar is solvent cleaned and sandblasted. The result resists scratches and does not clog the knurling.
70 Percent Past Zinc
Cerakote tests 70 percent more corrosion resistant than zinc finishes, which matters in humid garages where sweat and Florida air work on bare steel year round.
Do It All Spec
Olympic and Power knurl marks, light knurl depth, no center knurl, medium whip. A configuration that moves comfortably between cross training, powerlifting, and Olympic work.
Dual Bronze Bushings
Self lubricating bronze bushings at each sleeve give consistent, maintenance free spin through the 16.25 inch sleeves, stable under a slow pull and quick under a clean.
Made in the USA
PRx manufactures this barbell in the USA and backs it with a lifetime warranty. It ships to your door directly from PRx, American made and factory direct.
A Home on Your Rack
Synergy barbell holders bolt to any 3x3 inch upright and store bars vertically, keeping the Cerakote finish off the concrete between sessions and safely on display.
| Weight | 20 kg (45 lb) |
| Total Length | 86 inches |
| Sleeve Length | 16.25 inches |
| Sleeve Diameter | 1.96 inches |
| Shaft Diameter | 28.5mm |
| Knurl Marks | Olympic and Power |
| Knurl Depth | Light |
| Center Knurl | No |
| Whip | Medium |
| Sleeve | Dual bronze self lubricating bushings, pressed bright zinc |
| Finish | Cerakote, 0.001 inch coating |
| Tensile Strength | 190k PSI |
| Warranty | Lifetime |
Good to Know
| Plates | Fits standard Olympic plates, 2 inch collar |
| Ships From | PRx Performance, direct |
| Warranty | Lifetime |
- Free weights arrive ready to use. No assembly required.
- Looking for rack assembly instructions? Visit our File Library ›
Frequently Asked Questions
A ceramic based coating, oven cured onto the bar after cleaning and sandblasting. It is extremely scratch resistant, 70 percent more corrosion resistant than zinc, and only 0.001 inches thick so the knurling stays sharp.
Same 20 kg, 28.5mm, 190k PSI class of bar. The Cerakote version trades the zinc finish for the ceramic coating and its corrosion resistance and color.
PRx backs this barbell with a lifetime warranty. Synergy racks carry their own separate Limited Lifetime Warranty, so a full Synergy and PRx setup is covered end to end.
Synergy barbell holders bolt to any 3x3 inch rack upright and hold bars vertically, so the barbell stores against the wall on the same rack system as the rest of your gym.
Yes. Synergy Custom Fitness is a PRx Performance retail partner. Every PRx item on our site is the same product PRx sells directly, fulfilled and shipped by PRx itself.
PRx free weights ship separately and arrive directly from PRx Performance. They are not part of Synergy's free shipping promotion, which applies to orders over $699 of Synergy racks and accessories. If your order mixes racks and free weights, expect separate deliveries.
Our standard 30 day return policy applies. Email support@synergycustomfitness.com with your order number to get a Return Merchandise Authorization within 30 days of delivery, and keep items in their original new condition and packaging.