Alpha KB | Vertical Kettlebell Storage Rack
Holds 15 to 20 Kettlebells
Four to six on every tier
Off the Floor
Storage goes up, not out
Runs Your Accessories
Landmines, ropes, barbell holders
11 Gauge Steel
Powder coated, built to last
Kettlebells are the worst offenders for taking over a floor. This one stacks 15 to 20 of them into a single column, four to six per tier, in three tiers or four. The 3x3 inch upright also runs landmines, battle rope anchors, and barbell holders. An 11 gauge steel frame and rubber feet keep it planted on hardwood or tile.
Color:Black
Tiers:3-Tier Vertical Kettlebell Storage Rack
Designed & Built in Florida
Every rack is made to order and manufactured in-house to ensure premium quality.
Fifteen to Twenty Kettlebells
Each tier takes four to six bells depending on size. Four competition kettlebells fit comfortably per tier, and smaller cast iron bells go six across. Every tier is built from two shelves.
Off the Floor, Into One Column
A row of kettlebells on the floor eats a whole wall and never stays tidy. Going vertical pulls the set into one column with a footprint small enough for a closet or the corner of a garage.
Modular by Design
Pick three tiers or four when you order. The shelves bolt to any 3x3 upright, so they can move onto your squat rack later, and on a three tier you can stagger them into a zig-zag.
Your Accessories Mount Here Too
Any 2x3 base accessory works: battle rope anchors, Olympic bar landmines, and barbell holders all bolt on. Same footprint, so the rack quietly becomes the hub for everything else you own.
Solid and Dependable
An 11 gauge steel frame under a chip-resistant powder coat, on a 3x3 inch upright with half inch hardware. Rubber feet included to stop sliding on hardwood or tile. Limited Lifetime Warranty.
Assembles in Minutes
Every tool you need ships in the box. Bolt the upright to the base, set the shelves at the heights that suit your bells, press on the rubber feet, and load it up. No drilling required.
| Model Number | KBRK3 (3-Tier) or KBRK4 (4-Tier) |
| Kettlebell Capacity | 15 to 20 bells. Four to six per tier depending on size |
| Shelves | Two shelves per tier |
| Assembled Dimensions (3-Tier) | 50 3/8" H × 25 7/16" W × 24 1/4" D |
| Upright | 3" × 3" with 1" holes 2" apart |
| Base | 2" × 3" tubing with 9/16" holes 2" apart |
| Material | 11 Gauge Steel |
| Hardware | 1/2" Hardware |
| Finish Type | Powder Coat |
| Feet | Rubber, included |
| Colors | 12 colors |
| Warranty | Limited Lifetime |
| Country of Origin | Designed & built in Florida, USA |
Compatible With
| Kettlebells | Competition and standard cast iron. Four competition bells per tier, around six smaller bells |
| Barbell Holder | BBH-H1 Barbell Holder for the base, which keeps the bar clear of the shelving |
| Battle Rope Anchor | 2x3 Base model |
| Olympic Bar Landmine | 2x3 Base model |
| Shelf Liners | Kettlebell Shelf Rubber Liner. Order two per tier, since each tier is two shelves |
| Other Uprights | Shelves mount to any 3x3 upright, including an existing squat rack |
| What's in the Box | 1 upright, 1 base, shelves for the tier count you selected, rubber feet, and all assembly hardware and tools. Kettlebells not included |
Frequently Asked Questions
The upright, the base, the shelves for whichever tier count you select, rubber feet, and every piece of assembly hardware plus the tools to put it together.
Kettlebells are not included. Neither are the shelf liners, barbells, landmines, battle rope anchors, or barbell holders shown in the product photos. Those are all sold separately.
Kettlebells are not included. Neither are the shelf liners, barbells, landmines, battle rope anchors, or barbell holders shown in the product photos. Those are all sold separately.
Fifteen to twenty, depending on the size of your bells.
Each tier holds four to six. Competition kettlebells have a wider base, so plan on four per tier. Smaller cast iron bells fit around six across.
Each tier holds four to six. Competition kettlebells have a wider base, so plan on four per tier. Smaller cast iron bells fit around six across.
Count your bells and divide by five. If you own twelve or fewer, three tiers covers it with room to grow. Past that, go with four.
One trade-off worth knowing: four tiers packs the shelves closer together, so there is less vertical clearance when you reach in for a heavy bell. Three tiers gives you more room between shelves, and you can stagger them into a zig-zag for even easier access.
One trade-off worth knowing: four tiers packs the shelves closer together, so there is less vertical clearance when you reach in for a heavy bell. Three tiers gives you more room between shelves, and you can stagger them into a zig-zag for even easier access.
You will run out of shelf space long before you get near the limit. The shelves are built from the same 11 gauge steel as the frame and are made to take the heaviest kettlebells you can buy.
Any accessory on the site built for a 2x3 base works here: the Battle Rope Anchor, the Olympic Bar Landmine, and the Barbell Holder.
For the barbell holder specifically, you want the BBH-H1 Barbell Holder for the base. It holds the bar low and clear of the shelving, so it does not get in the way when you are reaching for a bell.
See the Barbell Holder for 2x3 Base ›
For the barbell holder specifically, you want the BBH-H1 Barbell Holder for the base. It holds the bar low and clear of the shelving, so it does not get in the way when you are reaching for a bell.
See the Barbell Holder for 2x3 Base ›
Yes. The shelves attach to any 3x3 upright, so if your rack has spare real estate you can move them over there instead of running a separate tower. That also means the rack is not a dead end if your gym layout changes later.
Yes, on the three tier. There is enough vertical room to offset the shelves into a zig-zag configuration, which opens up the reach into each level. The four tier uses that spare height for the extra tier, so the shelves sit evenly spaced.
They are optional, and they protect both the powder coat and your bells from chipping each other.
If you want them, order two per tier. Each tier is built from two shelves, so a three tier rack needs six liners and a four tier needs eight.
See the Kettlebell Shelf Rubber Liner ›
If you want them, order two per tier. Each tier is built from two shelves, so a three tier rack needs six liners and a four tier needs eight.
See the Kettlebell Shelf Rubber Liner ›