Barbell Holder | For 2x3 Base
Mounts on 2x3 Base
Any 2x3 inch base tubing
Fits 2 Inch Bars
Standard Olympic barbells
Off the Floor
Bars stop leaning in corners
3/16 Inch Steel
Powder coated, built to last
The base-mounted barbell holder. It bolts to the 2x3 inch base tubing on any Synergy vertical or horizontal rack and takes standard 2 inch Olympic bars, holding them low and out of the way. Mounting low is the point: it keeps the bar clear of shelving above, so it does not fight your storage. Hardware included.
Color:Black
Designed & Built in Florida
Every rack is made to order and manufactured in-house to ensure premium quality.
Bolts to Your Base Tubing
Designed for the 2x3 inch base leg on Synergy vertical and horizontal racks. If your rack already has a base you can reach, this holder has somewhere to go. All mounting hardware is included.
Built for Olympic Bars
Sized for standard 2 inch Olympic barbells. Slide the bar in and it stays put, so your bar is never leaning against a wall or lying across the floor between sessions.
Clear of the Shelving
Because it mounts low on the base rather than up the upright, the bar sits below your shelves. That is what makes it the right choice on a rack you are also using for kettlebell or plate storage.
Two Mounts, One System
The BBH-H1 goes on 2x3 base tubing. Its sibling, the BBH-V1, mounts on a 3x3 upright with 1 inch holes. Same holder, two mounting positions, so you can put a bar wherever there is room.
Solid and Dependable
Built from 3/16 inch steel with a chip-resistant powder coat, in the same 12 colors as the rest of the line. Weighs 3.6 pounds assembled and is backed by our Limited Lifetime Warranty.
Simple Assembly
Straightforward attachment to any upright beam. Half inch hardware ships with it, so there is nothing else to buy and no trip to the hardware store before you can use it.
| Model Number | BBH-H1 |
| Dimensions | 8.50" H × 7.50" W × 4.44" D |
| Material | 3/16" Steel |
| Fits | 2" Olympic Bars |
| Mounts To | 2" x 3" base tubing |
| Hardware | 1/2" Hardware, included |
| Finish Type | Powder Coat |
| Assembled Net Weight | 3.6 lb |
| Packed Gross Weight | 5 lb |
| Colors | 12 colors |
| Warranty | Limited Lifetime |
| Country of Origin | Designed & built in Florida, USA |
Compatible With
| Barbells | Standard 2" Olympic bars |
| Racks | Any Synergy rack with 2" x 3" base tubing, vertical or horizontal |
| Storage Racks | Recommended on the Alpha KB, Alpha PK and Delta PK, where it keeps the bar clear of the shelves |
| Alternative Mount | BBH-V1 for a 3x3" upright with 1" holes |
| What's in the Box | 1 Barbell Holder and the 1/2" mounting hardware |
No separate assembly document is needed for this part. Mounting hardware and fitting instructions are included in the box.
Frequently Asked Questions
The barbell holder and all of the half inch mounting hardware you need to attach it.
Barbells, racks, and any other equipment shown in the product photos are sold separately and are not included.
Barbells, racks, and any other equipment shown in the product photos are sold separately and are not included.
It depends on where you want the bar to sit.
This one, the BBH-H1, mounts on 2x3 inch base tubing, low down on the rack. Pick it if your rack has shelves, because the bar stays clear of them.
The BBH-V1 mounts directly on a 3x3 inch upright with 1 inch holes, which puts the bar higher up. Pick it if the upright is free.
See the Barbell Holder for 3x3 Upright ›
This one, the BBH-H1, mounts on 2x3 inch base tubing, low down on the rack. Pick it if your rack has shelves, because the bar stays clear of them.
The BBH-V1 mounts directly on a 3x3 inch upright with 1 inch holes, which puts the bar higher up. Pick it if the upright is free.
See the Barbell Holder for 3x3 Upright ›
If the rack has 2 inch by 3 inch base tubing, yes. That covers Synergy vertical racks, horizontal racks, plate trees, and the hybrid PK racks. Measure the tubing on the base leg if you are unsure.
Standard 2 inch Olympic barbells, which is what the overwhelming majority of home gym bars are. Specialty bars with unusual sleeve shapes may not seat the same way.
Twelve colors: Black, Synergy Blue, White, Red, Grey, Orange, Yellow, Blue, Military Green, Military Tan, Hot Pink, and Purple. Pick your color when you order.
A few minutes with the included hardware. Line the holder up with the holes in your base tubing, bolt it on, and it is ready. No drilling and nothing else to buy.