Delta PLT | 4-Tier Vertical Plate Tree
Eight Plate Holders
Four tiers, not the usual three
Runs Your Accessories
Landmines, ropes, barbell holders
One Small Footprint
More storage, same floor space
11 Gauge Steel
Powder coated, built to last
Most plate trees stop at three tiers. This one runs four, for eight plate holders in the same floor space, and takes any IWF standard Olympic plate. The 3x3 inch upright also runs landmines, battle rope anchors, and barbell holders. An 11 gauge steel frame and rubber feet keep it planted on hardwood or tile. Assembles in minutes with the tools included.
Color:Black
Designed & Built in Florida
Every rack is made to order and manufactured in-house to ensure premium quality.
Four Tiers, Not Three
Every other tree on the market stops at three tiers. This one runs four, for eight plate holders instead of six, and it does it without taking any more floor space than a three-tier tree.
Your Accessories Mount Here Too
The 3x3 inch upright takes the same attachments as a full rack. Battle rope anchors and landmines bolt to the legs, barbell holders go on either side of the upright. All in the same footprint.
The Whole Set, One Column
Eight holders is enough for a full Olympic set with room left over, which means one tree instead of two smaller racks spread across the room. Everything lands in a single column you can walk around.
Room to Grow
Outgrow eight holders and the Plate Holder Extender bolts straight on, turning side-facing storage forward or doubling your holders on either side. Same tree, same floor space, more plates.
Solid and Dependable
An 11 gauge steel frame under a chip-resistant powder coat, built on a 3x3 inch upright with 1 inch holes and half inch hardware. Rubber feet included. Backed by our Limited Lifetime Warranty.
Assembles in Minutes
Every tool you need ships in the box. Bolt the upright to the base, mount the eight holders, set the rubber feet, and start loading plates. No drilling and no extra trips for hardware.
| Model Number | PLT-RK4DEL |
| Plate Holders Included | Eight, across four tiers |
| Assembled Dimensions | 70 1/2" H × 25 7/16" W × 24 1/4" D |
| Upright | 3" × 3" with 1" holes 2" apart |
| Base | 2" × 3" tubing with 9/16" holes 2" apart |
| Material | 11 Gauge Steel |
| Hardware | 1/2" Hardware |
| Finish Type | Powder Coat |
| Feet | Rubber, included |
| Colors | 12 upright colors. Plate holders in a matching color or black |
| Warranty | Limited Lifetime |
| Country of Origin | Designed & built in Florida, USA |
Compatible With
| Plates | Any and all IWF standard Olympic plates |
| Battle Rope Anchor | 2x3 Base model, mounts to the legs |
| Olympic Bar Landmine | 2x3 Base model, mounts to the legs |
| Barbell Holder | Mounts on either side of the upright |
| Plate Holder Extender | Adds forward-facing holders, or doubles the holders you already have |
| Casters | Wheels can be added to the base if you want it mobile |
| What's in the Box | 1 upright, 1 base, 8 plate holders, rubber feet, and all assembly hardware and tools |
Frequently Asked Questions
The upright, the base, eight plate holders across four tiers, rubber feet, and every piece of assembly hardware plus the tools to put it together.
Weight plates, barbells, landmines, battle rope anchors, barbell holders, and any other equipment shown in the product photos are sold separately and are not included.
Weight plates, barbells, landmines, battle rope anchors, barbell holders, and any other equipment shown in the product photos are sold separately and are not included.
Tier count is the difference. The Delta runs four tiers with eight plate holders, the Alpha runs three tiers with six.
Both are built on the same 3x3 inch steel upright, both take any IWF standard Olympic plate, and both mount the same landmines, battle rope anchors, and barbell holders. Pick the Delta if you want a full set on one tree with room to spare, or the Alpha if six holders covers what you own.
See the Alpha PLT 3-Tier ›
Both are built on the same 3x3 inch steel upright, both take any IWF standard Olympic plate, and both mount the same landmines, battle rope anchors, and barbell holders. Pick the Delta if you want a full set on one tree with room to spare, or the Alpha if six holders covers what you own.
See the Alpha PLT 3-Tier ›
Any and all IWF standard Olympic plates. Bumpers, cast iron, urethane, competition discs, and change plates all load the same way, so you can mix a full set across the four tiers.
Yes, with the Plate Holder Extender. It is an elbow attachment that bolts through the tree's existing holes and rotates plate storage 90 degrees.
Use it to turn side-facing holders forward so you load and unload plates from the front instead of reaching around the side, or to add a second row of holders and double your capacity in the same footprint.
See the Plate Holder Extender ›
Use it to turn side-facing holders forward so you load and unload plates from the front instead of reaching around the side, or to add a second row of holders and double your capacity in the same footprint.
See the Plate Holder Extender ›
The 3x3 inch upright is built to take the full accessory line.
On the legs: the Battle Rope Anchor for 2x3 Base and the Olympic Bar Landmine for 2x3 Base.
On the upright: a Barbell Holder mounts on either side.
All of it lives in the same footprint the tree already occupies, so adding accessories does not cost you any extra floor space.
On the legs: the Battle Rope Anchor for 2x3 Base and the Olympic Bar Landmine for 2x3 Base.
On the upright: a Barbell Holder mounts on either side.
All of it lives in the same footprint the tree already occupies, so adding accessories does not cost you any extra floor space.
Absolutely. Casters can be added to the base if you want to roll a loaded tree out of the way between sessions. The rubber feet that ship with it are the default, so use one or the other depending on whether you want the tree planted or mobile.
Straightforward, and it takes minutes rather than an afternoon. Bolt the upright to the base, mount the eight plate holders at the heights you want, press on the rubber feet, and load it up. Every tool you need is in the box, and the full instructions are in the Product Documents tab above.