Flat Shelf Rubber Liner
Protects Both Sides
Your gear and your shelf
Non-Slip Surface
Gear stays where you put it
Quieter Racking
Dampens the clang
Two Widths
Matched to the flat shelf
A rubber liner cut to drop onto the flat shelves of a Full Horizontal Storage Rack. It stops steel and gear grinding against each other, takes the noise out of setting down a heavy bell, and grips enough that nothing drifts. Two widths matched to the 43 and 70 inch shelves. Black only.
Choose Width:43" wide
Designed & Built in Florida
Every rack is made to order and manufactured in-house to ensure premium quality.
Protect Your Equipment
Shields both the shelf and your gym gear from unnecessary wear. Metal on metal is how a shelf loses its finish and a kettlebell gains scratches; a rubber layer between them stops both.
Noise Dampening
Minimizes noise when racking and unracking, which makes for a quieter and more focused session. It matters most in a garage or basement where sound carries through the house.
Non-Slip Grip
The grippy rubber surface keeps gear securely in place and prevents unwanted movement. On a wide flat shelf that is the difference between organized storage and things migrating to the edge.
Cut to the Shelf
Sized to the flat shelves in both widths, so it lies flat with no trimming, adhesive or fasteners. Set it down and it is done.
Durable Design
Built to handle the toughest gym environments while keeping its look and function. It is a consumable in principle but not in practice; these last.
Nothing to Install
There is no assembly at all. Lay the liner on the shelf, which also means you can lift it out to clean underneath or move it to another shelf later.
| Model Number, 43 inch | FSHLRBL-DBRK-43 |
| Dimensions, 43 inch | 43" L × 16" W |
| Dimensions, 70 inch | 70" L × 16" W |
| Material | Rubber |
| Color | Black only |
| Installation | Drop in place, no fasteners |
| Country of Origin | Designed & built in Florida, USA |
Compatible With
| Shelves | The flat shelves on a Full Horizontal Storage Rack |
| Widths | 43" and 70", matched to the shelf |
| Not For | Kettlebell shelves. Those take the Kettlebell Shelf Rubber Liner, a different size |
| What's in the Box | 1 rubber liner |
No separate assembly document is needed for this part. Mounting hardware and fitting instructions are included in the box.
Frequently Asked Questions
One rubber liner, cut to the width you select.
The shelf itself, the rack, and any gear shown in the product photos are sold separately and are not included.
The shelf itself, the rack, and any gear shown in the product photos are sold separately and are not included.
Match it to your shelf. The liner comes in 43 and 70 inch versions, cut to the same 16 inch depth as the Flat Shelf Add-on in each width.
No, and they are not interchangeable.
This one is cut for the wide flat shelves at 43 or 70 inches long by 16 inches deep. The Kettlebell Shelf Rubber Liner is a much smaller part at 18 by 10 inches, made for the kettlebell shelves on the KB and PK racks.
This one is cut for the wide flat shelves at 43 or 70 inches long by 16 inches deep. The Kettlebell Shelf Rubber Liner is a much smaller part at 18 by 10 inches, made for the kettlebell shelves on the KB and PK racks.
Yes, particularly with heavy gear. Steel on steel rings; rubber absorbs most of that impact instead. It will not make a loaded rack silent, but it takes the sharp edge off every rack and unrack.
That is what the grip is for. The rubber surface holds equipment where you set it down rather than letting it creep toward the shelf edge, which matters more on a wide open shelf than on a tiered one.
Black only. The liner sits under your gear rather than being a visible part of the rack, so it stays neutral against every frame color.
You do not, really. Lay it on the shelf and it is done. Nothing to bolt, nothing to glue, and it lifts straight back out for cleaning.
Yes, one liner covers one shelf. If you are lining several shelves on the same rack, order one per shelf in the matching width.