Olympic Bar Landmine | For 2x3 Base Attachment
Fits Standard 2x3 Bases
Mounts at floor level on rack base tubes
360° Pivot
Rows, presses, twists, overhead landmine work
Magnetic Park
Docks flush against the upright when not in use
12 Color Options
Match your rack or your gym aesthetic
The LM-BR2 landmine bolts directly to a 2x3" base tube with 1" holes on 2" centers, mounting at floor level on a horizontal rack (or on a vertical rack base when that space isn't being used by another accessory). Loads rotate a full 360° for rows, presses, twists, and overhead variations. When you're done, a built-in magnet docks it flush against the metal so it stores tight, out of the way.
Color:Black
Fits Standard 2x3 Bases
Bolts onto any 2" x 3" base tube with 1" mounting holes on 2" centers, the standard base tube size on Synergy racks and most premium rack brands. Mounts at floor level on the rack base.
Built for Olympic Bars
Sized for the standard 2" (50mm) Olympic sleeve. Works with any Olympic barbell on the market: 7-foot bars, training bars, cerakote, EZ-curl Olympic, and more. Not compatible with 1" standard bars.
360° Pivot
The pivot rotates a full 360 degrees so the bar moves freely in every direction. Unlocks rows, presses, twists, Pallof variations, and every other exercise in the landmine playbook without binding at any angle.
Magnetic Storage Point
A built-in magnet docks the landmine flush against the metal of your rack when not in use. Push it back, it stays. Keeps the bar out of your floor space between sets.
Built to Last
9-gauge steel tubing (heavier than standard 11-gauge), 1/2" hardware, and chip-resistant powder coat. 5.3 lb of solid metal that stays put under load. Backed by our Limited Lifetime Warranty.
12 Color Options
Available in 12 powder coat colors: Black, Synergy Blue, White, Red, Grey, Orange, Yellow, Blue, Military Green, Military Tan, Hot Pink, and Purple. Match your rack or stand out.
| Model Number | LM-BR2 |
| Dimensions | 15.25"H × 3.44"W × 3.69"D |
| Material | 9 Gauge Steel Tubing |
| Hardware | ½" Hardware |
| Finish Type | Powder Coat |
| Assembled Weight | 5.3 lb |
| Shipping Weight | 7 lb |
| Warranty | Limited Lifetime |
Compatible With
| Base Tubes | 2" × 3" with 1" mounting holes on 2" centers |
| Barbells | Olympic bars with 2" (50mm) sleeves · Not for 1" standard bars |
| Best Position | Horizontal rack base · Also fits vertical rack base if not used by another accessory |
| Compatible Racks | Synergy and most premium rack brands with 2x3 base tubes |
| What's in the Box | 1 landmine attachment, mounting bracket, all required hardware |
Frequently Asked Questions
No. This listing is for the LM-BR2 landmine attachment only. Olympic barbells, weight plates, and the rack shown in product photos are not included. The landmine does come with all the mounting hardware you need to install it on your existing 2x3 base.
The LM-BR2 (this listing) mounts to a 2x3" base tube, the horizontal steel running along the floor on most racks. Pick LM-BR2 if you want the landmine at floor level (best for horizontal racks, or for vertical racks if the base section isn't being used for another accessory). The LM-PL1 mounts to a 3x3" upright above the floor. Best for vertical racks where you want the landmine higher up the post.
A 2x3 base is the 2" by 3" steel tube that runs along the floor on most premium racks, forming the rack's base frame. It typically has 1" mounting holes spaced on 2" centers. If your rack has a 2x3 base tube with that hole pattern, this landmine will bolt on. Most Synergy racks and many other premium brands use this size. If you're not sure about your rack, send us a photo at support@synergycustomfitness.com.
The pivot rotates a full 360 degrees so a loaded Olympic bar can move in any direction without binding. That covers the full landmine playbook: rows, presses, twists, T-bar rows, Pallof presses, overhead landmine work, single-arm variations, and rotational core exercises.
A magnet built into the landmine holds it flush against the metal of your rack when not in use. Push the empty landmine against the upright after a set and the magnet keeps it parked there, out of your floor space, until you're ready to load it back up.
Any Olympic barbell with the standard 2" (50mm) sleeve. That covers nearly every full-size bar on the market: 7-foot bars, training bars, cerakote bars, deadlift bars, squat bars, and EZ-curl Olympic bars. It will not fit 1" diameter "standard" sleeves found on entry-level bars.
Quick. Two bolts through your base tube's existing 1" mounting holes secure the bracket, then the landmine pivot attaches to the bracket. Most installs take 10 to 15 minutes with a single wrench. All hardware is included. PDF instructions are linked in the Documents tab above.
Limited Lifetime warranty on the steel and powder coat finish. The 9-gauge steel construction is built to outlast the bar you'll use with it. We also offer a 30-day return window from delivery if you change your mind.
whats the difference between the 2x3 and 3x3 landmine variation?
Our LM-PL1 3x3 was designed to be mounted directly on a 3x3 upright. Our LM-BR2 2x3 was designed to be mounted directly on a 2x3 upright, or the base of our racks.
perfect for commercial gyms
Easily turn your gym space into the perfect circuit training setup.
perfect for home gyms
Maximize your space by converting our vertical dumbbell rack into more than just storage.