Weight Plate Storage Mount
4 to 6 Plates
Per mount, by plate size
Fits 3x3 Uprights
1" holes, 2" apart
Plates Off the Floor
Onto the rack you already own
11 Gauge Steel
Powder coated, built to last
The plate holder that turns any 3x3 inch upright into plate storage. It bolts on wherever you have free holes, takes four to six plates depending on size, and gets a stack off the floor without adding a single square foot of footprint. Half inch hardware is included, and it comes in the same twelve colors as the racks.
Color:Black
Designed & Built in Florida
Every rack is made to order and manufactured in-house to ensure premium quality.
Four to Six Plates Each
One mount takes four to six plates depending on their diameter. Add mounts as your collection grows rather than buying a whole new storage solution every time.
Bolts to Any 3x3 Upright
Built for 3x3 inch uprights with 1 inch holes on 2 inch centres. If your rack, tree, or squat stand matches that, this mount has somewhere to live.
Use the Space You Have
Plates stacked on the floor spread out and stay there. Hanging them on an upright you already own is the cheapest floor space you will ever reclaim in a home gym.
Add Them As You Go
Mounts work one at a time. Start with one, add more as the collection grows, and put them at whatever heights suit the plates you reach for most.
Solid and Dependable
Built from 11 gauge steel with a chip-resistant powder coat, weighing 3.2 pounds. Half inch hardware is included and the whole thing is backed by our Limited Lifetime Warranty.
Quick and Simple Installation
No complex assembly and no lengthy install. Line the mount up with the holes on your upright, bolt it through with the included hardware, and start loading plates.
| Model Number | PLH1 |
| Dimensions | 6" H × 2.75" W × 12" L |
| Capacity | 4 to 6 plates, depending on plate size |
| Material | 11 Gauge Steel |
| Mounts To | 3" x 3" uprights with 1" holes, 2" apart |
| Hardware | 1/2" Hardware, included |
| Finish Type | Powder Coat |
| Assembled Net Weight | 3.2 lb |
| Packed Gross Weight | 5 lb |
| Colors | 12 colors |
| Warranty | Limited Lifetime |
| Country of Origin | Designed & built in Florida, USA |
Compatible With
| Plates | Olympic weight plates, 4 to 6 per mount |
| Uprights | Any 3" x 3" upright with 1" holes on 2" centres |
| Racks | Synergy vertical and horizontal racks, plate trees, and the hybrid PK racks |
| Plate Holder Extender | Mounts on the Extender to point plates forward instead of out to the side |
| What's in the Box | 1 Weight Plate Storage Mount and the 1/2" mounting hardware |
Frequently Asked Questions
One plate storage mount and all of the half inch mounting hardware needed to attach it.
Weight plates, racks, and any other equipment shown in the product photos are sold separately and are not included.
Weight plates, racks, and any other equipment shown in the product photos are sold separately and are not included.
Four to six, depending on the diameter of your plates. Bumpers take up more room on the post than thinner iron plates, so a mount loaded with bumpers sits at the lower end of that range.
If the upright is 3 inches by 3 inches with 1 inch holes spaced 2 inches apart, yes. That covers Synergy vertical racks, horizontal racks, plate trees, hybrid PK racks, and most premium squat racks built to the same standard.
Yes, and most people do. Mounts install one at a time wherever you have free holes, so you can start with a single mount and keep adding as the plate collection grows.
Yes, with the Plate Holder Extender. It is an elbow attachment that rotates the mount 90 degrees, so plates load from the front rather than the side and your rack can sit flush against the wall.
Twelve colors: Black, Synergy Blue, White, Red, Grey, Orange, Yellow, Blue, Military Green, Military Tan, Hot Pink, and Purple. Pick your color when you order.
A few minutes. Line the mount up with the holes on your upright, bolt it through with the included half inch hardware, and load your plates. Full instructions are in the Product Documents tab above.