Delta PK | 4-Tier Vertical Hybrid Plate and Kettlebell Storage Rack
Four Tiers
Bells and plates on one rack
Three Ways to Split It
Same price, whichever you pick
Runs Your Accessories
Landmines, ropes, barbell holders
11 Gauge Steel
Powder coated, built to last
The big one. Four tiers on a 3x3 inch upright, holding 15 to 20 kettlebells and 16 to 24 plates, with three ways to divide the tiers between the two. It runs landmines, battle rope anchors, and barbell holders on the same frame. An 11 gauge steel build with rubber feet, standing just under six feet tall.
Color:Black
Tiers:2 Tiers for Plates | 2 Tiers for Kettlebells
Designed & Built in Florida
Every rack is made to order and manufactured in-house to ensure premium quality.
Four Tiers, Two Jobs
Kettlebell shelves and plate mounts on one 3x3 inch upright, holding 15 to 20 bells and 16 to 24 plates. That is a bell rack and a plate tree consolidated into a single column of floor space.
Three Ways to Divide It
Three plate tiers and one for bells, an even two and two, or one plate tier and three for bells. Every split costs the same, so the decision is purely about what fills your floor today.
Four to Six on Every Level
Each kettlebell tier takes four to six bells, four if they are competition bells with the wider base. Each plate storage mount takes four to six plates, depending on plate diameter.
Your Accessories Mount Here Too
Any 2x3 base accessory bolts on: battle rope anchors, Olympic bar landmines, and barbell holders. The shelves also mount to any other 3x3 upright, so nothing here is locked to this frame.
Solid and Dependable
An 11 gauge steel frame under a chip-resistant powder coat, on a 3x3 inch upright with half inch hardware. Rubber feet included to stop sliding on hardwood or tile. Limited Lifetime Warranty.
Assembles in Minutes
Every tool you need ships in the box, including the wrench for the shelf bolts. Bolt the upright to the base, set your shelves and plate mounts, press on the rubber feet, and load it up.
| Configuration | Four tiers. Three splits: 3 plate + 1 kettlebell, 2 + 2, or 1 plate + 3 kettlebell |
| SKU Prefix | P3K1-RK4-DEL, P2K2-RK4-DEL, or P1K3-RK4-DEL |
| Kettlebell Capacity | 4 to 6 per kettlebell tier depending on size. 15 to 20 bells overall |
| Plate Capacity | 4 to 6 per storage mount depending on size. 16 to 24 plates overall |
| Assembled Dimensions | 70 1/2" H × 25 7/16" W × 24 1/4" D |
| Upright | 3" × 3" with 1" holes 2" apart |
| Base | 2" × 3" tubing with 9/16" holes 2" apart |
| Material | 11 Gauge Steel |
| Hardware | 1/2" Hardware |
| Finish Type | Powder Coat |
| Feet | Rubber, included |
| Colors | 12 colors |
| Warranty | Limited Lifetime |
| Country of Origin | Designed & built in Florida, USA |
Compatible With
| Kettlebells | Competition and standard cast iron. Four competition bells per tier, around six smaller bells |
| Plates | Olympic weight plates, 4 to 6 per storage mount |
| Barbell Holder | BBH-H1 Barbell Holder for the base, which keeps the bar clear of the shelving |
| Battle Rope Anchor | 2x3 Base model |
| Olympic Bar Landmine | 2x3 Base model |
| Other Uprights | Shelves mount to any 3x3 upright, including an existing squat rack |
| What's in the Box | 1 upright, 1 base, the shelves and plate mounts for the split you selected, rubber feet, and all assembly hardware and tools. Kettlebells and plates not included |
Frequently Asked Questions
The upright, the base, the kettlebell shelves and plate storage mounts for whichever split you select, rubber feet, and every piece of assembly hardware plus the tools to put it together.
Kettlebells and weight plates are not included. Neither are the barbells, landmines, battle rope anchors, or barbell holders shown in the product photos. Those are all sold separately.
Kettlebells and weight plates are not included. Neither are the barbells, landmines, battle rope anchors, or barbell holders shown in the product photos. Those are all sold separately.
All three cost the same, so choose by what is currently taking up your floor.
3 tiers for plates, 1 for kettlebells: for barbell-first gyms with a full plate collection and a few bells on the side.
2 tiers for plates, 2 for kettlebells: the even split, and the one to pick if you genuinely train both or cannot decide.
1 tier for plates, 3 for kettlebells: for kettlebell-led training where the plates are a working set rather than a collection.
Each kettlebell tier holds four to six bells and each plate mount holds four to six plates, so count what you own, add whatever you plan to buy next, and give the extra tier to that side.
3 tiers for plates, 1 for kettlebells: for barbell-first gyms with a full plate collection and a few bells on the side.
2 tiers for plates, 2 for kettlebells: the even split, and the one to pick if you genuinely train both or cannot decide.
1 tier for plates, 3 for kettlebells: for kettlebell-led training where the plates are a working set rather than a collection.
Each kettlebell tier holds four to six bells and each plate mount holds four to six plates, so count what you own, add whatever you plan to buy next, and give the extra tier to that side.
Across the rack, 15 to 20 kettlebells and 16 to 24 plates, depending on the split you choose and the size of what you are storing.
Per level: each kettlebell tier holds four to six bells. Competition kettlebells have a wider base, so plan on four per tier, while smaller cast iron bells fit around six. Each plate storage mount holds four to six plates.
Per level: each kettlebell tier holds four to six bells. Competition kettlebells have a wider base, so plan on four per tier, while smaller cast iron bells fit around six. Each plate storage mount holds four to six plates.
Height and tier count. The Delta stands 70 1/2 inches tall with four tiers and three ways to split them. The Alpha PK is 50 3/8 inches with three tiers and two splits.
Both share the same 3x3 inch upright, the same footprint on the floor, and the same accessory compatibility. The Delta simply uses the vertical space above the Alpha to add a fourth tier, so pick the Delta if you have the ceiling height and the collection to fill it.
If you only need one kind of storage, the Alpha KB handles kettlebells alone and the Delta PLT handles plates alone.
Both share the same 3x3 inch upright, the same footprint on the floor, and the same accessory compatibility. The Delta simply uses the vertical space above the Alpha to add a fourth tier, so pick the Delta if you have the ceiling height and the collection to fill it.
If you only need one kind of storage, the Alpha KB handles kettlebells alone and the Delta PLT handles plates alone.
You will run out of shelf space long before you get near the limit. The shelves are built from the same 11 gauge steel as the frame and are made to take the heaviest kettlebells you can buy.
Any accessory on the site built for a 2x3 base works here: the Battle Rope Anchor, the Olympic Bar Landmine, and the Barbell Holder.
For the barbell holder specifically, you want the BBH-H1 Barbell Holder for the base. It holds the bar low and clear of the shelving, so it does not get in the way when you are reaching for a bell or a plate.
See the Barbell Holder for 2x3 Base ›
For the barbell holder specifically, you want the BBH-H1 Barbell Holder for the base. It holds the bar low and clear of the shelving, so it does not get in the way when you are reaching for a bell or a plate.
See the Barbell Holder for 2x3 Base ›
Yes. The shelves attach to any 3x3 upright, so if your rack has spare real estate you can move them over there instead of running a separate tower.
The upright itself is also useful on its own. Because it takes the same attachments a rack upright does, plenty of owners treat the Delta PK as a second upright for mounting equipment as well as a storage tower.
The upright itself is also useful on its own. Because it takes the same attachments a rack upright does, plenty of owners treat the Delta PK as a second upright for mounting equipment as well as a storage tower.
Straightforward, and it takes minutes rather than an afternoon. Bolt the upright to the base, mount the shelves and plate holders at the heights you want, press on the rubber feet, and load it up.
Every tool you need is in the box, including the wrench for the shelf bolts, and the full instructions are in the Product Documents tab above.
Every tool you need is in the box, including the wrench for the shelf bolts, and the full instructions are in the Product Documents tab above.